Dismantling joint three flanges type - Metallic and Rubber Expansion joint Flexible Metal Hoses

Compensatori di dilatazione
Giunto Straub metal grip
FLEXIBLE JOINT
Go to content

3 flanges dismantling joint

The dismantling joints with three flanges, find application in the field of waterworks to facilitate the installation and maintenance of hydraulic equipment (especially large size) in the yard.



Dismantling joint

Dimensions and travel


The dismantling joints are manufactured in the range of diameters from DN 50 to DN 2000. The standard lengths are shown in the catalog. On request can be made to three joints flanges with special lengths.


Travel are normally included within +/- 30 mm. On request we can be made joints with longer stroke up to about +/- 100 mm.


Operating Pressure and temperature

Pressioni nominali : da PN 2,5 a PN 64
Temperature massime : da -20°C a +120°C (la limitazione della temperatura è data dal materiale della guarnizione di tenuta; con alcuni tipi speciali di guarnizioni è possibile raggiungere i 180°C)

              
Nominal pressure: PN 2.5 to PN 64
Maximum temperature: -20° C +120° C (the temperature limitation is from the gasket material; with some special kinds of seals you can reach 180° C)

Construction materials for standard executions:

-Central body and Flanges in carbon steel S235JR (executions on request in stainless steel AISI304/316/316L)

-Seals: EPDM/NBR/VITON

-Rods and nuts: galvanized carbon steel (on request rods and nuts in stainless steel AISI 304/316)

Disassembly joints with flanges 3 can be supplied in version for ATV isolation from vibrations from machines (pumps, turbines) and the consequent noise.

Designed and built entirely in ITALY with materials that comply with UNI-EN and controlled in accordance with the Legislative Decree 23/2009 (EC Directive 2006/117 EURATOM)

Dismantling joint special execution
+39 0422 1627550
Copyright © 2020 TREVITEC, All Rights Reserved. - I T 0 4 1 1 5 6 0 0 2 6 6
Back to content